Wall Tables

Product Details:

Instrument table requires more weight bearing capacity, more number of electrical connections, high stability against vibrations, electrical safety, and many. We take all the above features in to consideration and design the instrumentation table. A plywood is placed in between the granite and the table frame structure when the load bearing capacity required above 100 kg per squire feet.

Features of Wall Table:

• Under bench Modules will be made of 20 SWG precoated Galvanised iron Sheet (TATA Steel – GI Sheet) and completely finished with epoxy powder coating.
• These modules will be provided with top drawer and  bottom cupboard with removable inner partition and with lockable doors and aesthetic powder coated  handles.
• The under-bench modules will be arranged alternatively.
• The base of the modules will be provided
• with skirting panels for aesthetic look.

Color and Table Top:

• Colour combination of IVORY and drawer fronts contrasting
• BLUE for aesthetic appeal by powder coating technique.
• Table Top is made of finely polished 18 mm ± 2 mm thick black Colour
• Granite with rounded edges.

Product Details:

Our Sink Units will be designed in such a way that the modules can be dismantled very easily in case of maintenance if required.  The under storage modules will be independent and entire load on the work  surface will be sustained by the “C” frame / Pedestal frame / Base frame and not on the storage modules. Under bench storage modules will have drawer and bottom cupboard and front open shutter. The drawer and cupboards will have necessary locking arrangements. Components to be powder coated is pre-treated using seven tank processor, to ensure that the substrate is clean and free from grease, rust.

Features of Sink Units:
Sink Units will be made of 20 SWG precoated  Galvanised iron Sheet (TATA Steel – GI Sheet)  and completely finished with epoxy powder coating.
These modules will be provided with top drawer and  bottom cupboard with removable inner partition and  with lockable doors and aesthetic powder coated  handles.
The under-bench modules will be arranged alternatively.
The base of the modules will be provided with skirting panels for aesthetic look.
• Telescopic rail for drawers
• PP Sink with swan neck taps
• Imported CED coated concealed Hinges
• SS curved handle
• Godrej or equivalent cam locks

Color and Table Top:

• Colour combination of IVORY and drawer fronts contrasting
• BLUE for aesthetic appeal by powder coating technique.
• Granite with rounded edges.

Product Details:

Instrument table requires more weight bearing capacity, more number of electrical connections, high stability against vibrations, electrical safety, and many. We take all the above features in to consideration and design the instrumentation table. A plywood is placed in between the granite and the table frame structure when the load bearing capacity required above 100 kg per squire feet.

Features of Wall Table:

• Under bench Modules will be made of 20 SWG precoated Galvanised iron Sheet (TATA Steel – GI Sheet)  and completely finished with epoxy powder coating.
• These modules will be provided with top drawer and  bottom cupboard with removable inner partition and  with lockable doors and aesthetic powder coated  handles.
• The under-bench modules will be arranged alternatively.
• The base of the modules will be provided with skirting panels for aesthetic look.

Color and Table Top:

• Colour combination of IVORY and drawer fronts contrasting
• BLUE for aesthetic appeal by powder coating technique.
• Granite with rounded edges. 

Product Details:

Wall table is projected along the wall side of the laboratory. This allows maximum open space in the middle of the laboratory. This trick can be used to keep some island table in the middle of the lab if the lab is bigger enough. If it is required to keep more number of instruments and those instruments requires many electrical connections, then wall table is a preferred. Also, in wet lab, that too in the multistory building, if the lab is in above ground floor, if maximum sink points required, wall table is a preferred one, because, making water inlet and drain outlet is very comfortable.

Features of Wall Table:

• These Modules will be made of 20 SWG precoated
• Galvanised iron Sheet (TATA Steel – GI Sheet) and completely finished with epoxy powder coating.
• These modules will be provided with top drawer and bottom cupboard with removable inner partition and with lockable doors and aesthetic powder coated handles.
• The under-bench modules will be arranged alternatively.
• The base of the modules will be provided with skirting panels for aesthetic look.

Color and Table Top:

• Colour combination of IVORY and drawer fronts contrasting
• BLUE for aesthetic appeal by powder coating technique.
• Granite with rounded edges.

Product Details:

Vibrations are elimininated by a complex anti vibration system
achieved through an optimized choice of mass and support stiffness ensuring a fast dampening effect. The inverted microscope is placed on an equilibrated and isolated
platform, which gives a smooth and roomy workspace around the
microscope for micromanipulation equipment, mini-incubators,
patient records etc.

Features of Anti Vibration Table:
Anti Vibration Table will be made of 20 SWG precoated  Galvanised iron Sheet (TATA Steel – GI Sheet)  and completely finished with epoxy powder coating.
These modules will be provided with top drawer and  bottom cupboard with removable inner partition and  with lockable doors and aesthetic powder coated  handles. The under-bench modules will be arranged alternatively. The base of the modules will be provided
with skirting panels for aesthetic look.

• Telescopic rail for drawers
• PP Sink with swan neck taps
• Imported CED coated concealed Hinges
• SS curved handle
• Godrej or equivalent cam locks

Color and Table Top:

• Colour combination of IVORY and drawer fronts contrasting
• BLUE for aesthetic appeal by powder coating technique.
• Granite with rounded edges.